Toyota Corolla Cross: My Settings
READ NEXT:
PRECAUTION PRECAUTIONS FOR DISCONNECTING CABLE FROM NEGATIVE (-) AUXILIARY BATTERY TERMINAL
NOTICE:
After the ignition switch is turned off, there may be a waiting time before disconnecting the
PARTS LOCATION ILLUSTRATION
*1 FORWARD RECOGNITION CAMERA
- - ILLUSTRATION
*1 MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
*2 COMBINATION METER ASSEMBLY
SEE MORE:
INSPECTION PROCEDURE 1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
5 (M-) - 6 (M+) 20°C (68°F)
0.3 to 100 Ω If
DESCRIPTION
The brake hold standby indicator light turns on if brake hold
control is possible when the following conditions required for operation standby
are met and the brake hold switch (electric parking brake switch assembly) is pressed
while the ignition switch is ON.
Conditions requ
Precaution
Inspection
