Toyota Corolla Cross: Rear Combination Light Assembly
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 REAR COMBINATION LIGHT ASSEMBLY
81560
- - CAUTION / NOTICE / HIN
DISASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (DISASSEMBLY)
Procedure Part Name Code
1 REAR SIDE MARKER LIGHT SOCKET
- -
- -
2 REAR SIDE MARKER
INSPECTION PROCEDURE 1. INSPECT REAR COMBINATION LIGHT LENS AND BODY LH (for Bulb Type Clearance Light)
(a) Check that the rear combination light lens and body LH.
(1) Apply auxiliary battery vo
SEE MORE:
Inspection
INSPECTION
PROCEDURE
1. INSPECT BRAKE HOLD SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY)
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the
table below.
Standard Resistance:
Tester Connection
DESCRIPTION Refer to DTC P012011. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P022015 Throttle/Pedal Position Sensor/Switch "B" Circuit Short to Battery or Open
The output voltage of VTA2 is higher than 4.75 V, and VTA1 is
Removal
Brake Hold Switch
