Toyota Corolla Cross: Radiator
READ NEXT:
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT
CAUTION: Do not remove the reserve tank cap and air release valve while the engine and radiator assembly are still hot. Pressurized, hot engine coolant
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FAN WITH MOTOR ASSEMBLY
- -
- -
2 INLET HYBRID RADIATOR
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 RADIATOR DRAIN COCK PLUG
16400B
- -
2
SEE MORE:
DESCRIPTION The air fuel ratio sensor (sensor 1) generates current that corresponds to the actual air fuel ratio. This sensor current is used to provide the ECM with feedback so that it can control the air fuel ratio. The ECM determines the deviation from the stoichiometric air fuel ratio level, and
FAIL-SAFE CHART If any of the following DTCs are stored, the ECM enters fail-safe mode to allow the vehicle to be driven temporarily or stops fuel injection.
DTC Code Component
Fail-Safe Operation Fail-Safe Deactivation Condition
P001001 P001600 P136001 P136201 P261401
C
On-vehicle Inspection
HO2S Heater Control Bank 1 Sensor 1 Circuit Short to Battery (P003012,P003013,P101A9E)
