Toyota Corolla Cross: Radiator
READ NEXT:
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT
CAUTION: Do not remove the reserve tank cap and air release valve while the engine and radiator assembly are still hot. Pressurized, hot engine coolant
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FAN WITH MOTOR ASSEMBLY
- -
- -
2 NO. 2 WATER BY-PASS H
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 RADIATOR DRAIN COCK PLUG
16400B
- -
2
SEE MORE:
INSPECTION PROCEDURE 1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY
(a) Perform a visual check for any foreign matter on the temperature sensor (thermistor) of the mass air flow meter sub-assembly shown in the illustration.
OK: There is no foreign matter. If the result is not as specified, re
DESCRIPTION The engine has an ECM internal temperature sensor and intake air temperature sensor.
The resistance of a thermistor within the ECM internal temperature sensor and intake air temperature sensor increases as the temperature decreases and decreases as the temperature increases.
The volt
On-vehicle Inspection
Inspection
