Toyota Corolla Cross: Precaution
PRECAUTION
PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE (-) AUXILIARY BATTERY TERMINAL
NOTICE:
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Click here .gif)
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
READ NEXT:
PARTS LOCATION ILLUSTRATION
*1 HEADLIGHT ASSEMBLY LH
- TURN SIGNAL LIGHT - LOW BEAM
*2 HEADLIGHT ASSEMBLY RH
- TURN SIGNAL LIGHT - LOW BEAM
*3 SIDE TURN SIGNAL LIGH
SYSTEM DESCRIPTION OUTLINE OF THEFT DETERRENT SYSTEM
The theft deterrent system can be set/canceled by locking/unlocking the doors using any of the following operations:
Entry lock/unlock o
SEE MORE:
ON-VEHICLE INSPECTION PROCEDURE
1. INSPECT DRIVER SEAT BELT WARNING LIGHT HINT: The seat belt warning light on the combination meter assembly is used for both the driver seat and front passenger seat.
(a) Turn the ignition switch off. (b) Turn the ignition switch to ON.
(c) When the driver sea
TERMINALS OF ECU
CHECK SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)
*a
Front view of wire harness connector (to Skid Control ECU
(Brake Actuator Assembly))
-
-
(a) Disconnect the A151 skid control ECU (brake actuator assembly)
connector.
