Toyota Corolla Cross: System Diagram
SYSTEM DIAGRAM
READ NEXT:
SYSTEM DESCRIPTION OUTLINE OF THEFT DETERRENT SYSTEM
The theft deterrent system can be set/canceled by locking/unlocking the doors using any of the following operations:
Entry lock/unlock o
CAUTION / NOTICE / HINT
HINT:
Use this procedure to troubleshoot the theft deterrent system.
*: Use the GTS.
PROCEDURE
1. VEHICLE BROUGHT TO WORKSHOP
NEXT
CHECK FOR INTERMITTENT PROBLEMS
NOTICE:
If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before vehicle control
SEE MORE:
DESCRIPTION
Based on the signals from each sensor, the 4WD ECU assembly controls the transmitted
torque of the 4WD linear solenoid (transmission coupling assembly). This enables
driving force distribution to be optimized according to the driving conditions.
DTC No.
Detect
INSPECTION PROCEDURE 1. INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY
(a) Before installing the rear center seat outer belt assembly, check the ELR function.
NOTICE: Do not disassemble the retractor. (1) When the inclination of the retractor is 15° or less, check that the belt can be pulled
System Description
Linear Solenoid (C1298)
