Toyota Corolla Cross: Precaution
PRECAUTION
CAUTION:
Replace any faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting a vehicle that has been involved in a collision, be sure to check all of the seat belt systems regardless of whether or not the system was activated in the collision. Replace any damaged or malfunctioning systems.
ROAD TEST (IN SAFE AREA)
CAUTION:
Conduct this test in a safe area.
(a) Fasten the front seat belts.
(b) Drive the vehicle at 16 km/h (10 mph) and firmly depress the brake pedal. Check that the front seat outer belt assemblies lock and cannot be extended.
If a front seat outer belt assembly does not lock, replace it.
Click here
.gif)
HINT:
Inspect the seat belt assembly before installing it.
Click here
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 PRECAUTION
-
- -
2 CABLE FROM NEGATIVE AUXILIARY
INSPECTION PROCEDURE 1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY
(a) Before installing the front seat outer belt assembly, check the ELR function.
NOTICE: Do not disassemble the retractor. (1)
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
73200A -
-
SEE MORE:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FRONT FLOOR CENTER BRACE
57533B -
- -
2 FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)
17410
- -
3 PROPELLER SHAFT WITH
■ Checking the oil type and
preparing the item needed
Make sure to check the oil type
and prepare the items needed
before adding oil.
Engine oil selection
Oil quantity (Low → Full)
1.6 qt. (1.5 L, 1.3 Imp. qt.)
Item
Clean funnel
■ Adding engine oil
If the oil level is below or near
the
