Toyota Corolla Cross: Front Seat Outer Belt Assembly
READ NEXT:
PRECAUTION CAUTION: Replace any faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 PRECAUTION
-
- -
2 CABLE FROM NEGATIVE AUXILIARY
INSPECTION PROCEDURE 1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY
(a) Before installing the front seat outer belt assembly, check the ELR function.
NOTICE: Do not disassemble the retractor. (1)
SEE MORE:
DTC SUMMARY MALFUNCTION DESCRIPTION This DTC is stored when a short is detected in the inverter with converter assembly (generator inverter) or the hybrid vehicle transaxle assembly (generator (MG1)). The cause of this malfunction may be one of the following: Internal inverter malfunction
Gen
Opening the hood
1. Pull the hood lock release
lever.
The hood will pop up slightly.
2. Pull the auxiliary catch lever
to the left and lift the hood.
3. Hold the hood open by inserting
the support rod into the
slot.
WARNING
■Pre-driving check
Check that the hood is fully closed
and locked.
If
Precaution
Generator Inverter Actuator Stuck Closed (P0A7A73)
