Toyota Corolla Cross: Precaution
PRECAUTION
HINT:
- Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should be used as a reference only.
- When both standard and maximum or minimum values are listed for an inspection, use the standard value as a reference only and base any judgments on the maximum and minimum values.
READ NEXT:
DISASSEMBLY CAUTION / NOTICE / HINT COMPONENTS(DISASSEMBLY)
Procedure Part Name Code
1 NO. 1 VENTILATION CASE
12211 -
- -
2 CYLINDER BL
INSPECTION PROCEDURE 1. INSPECT CYLINDER BLOCK FOR WARPAGE
(a) Using a precision straightedge and feeler gauge, check the surface which contacts the cylinder head gasket for warpage.
Maximum
REASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (REASSEMBLY)
Procedure Part Name Code
1 RING PIN
11115A
- -
2 STRAIGHT PIN
1
SEE MORE:
INSPECTION PROCEDURE 1. INSPECT AIR FUEL RATIO SENSOR
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
1 (HA1A) - 2 (+B)
20°C (68°F) 1.6 to 3.2 Ω
1 (HA1
DESCRIPTION
Refer to DTC C050C12
Click here
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
MIL
DTC Output from
Note
C14E614
Left Rear Wheel Speed Sensor Supply Voltage Circuit
