Toyota Corolla Cross: Cylinder Block
READ NEXT:
PRECAUTION
HINT:
Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should be used as a reference only.
When both standard and maximum or minimum valu
DISASSEMBLY CAUTION / NOTICE / HINT COMPONENTS(DISASSEMBLY)
Procedure Part Name Code
1 NO. 1 VENTILATION CASE
12211 -
- -
2 CYLINDER BL
INSPECTION PROCEDURE 1. INSPECT CYLINDER BLOCK FOR WARPAGE
(a) Using a precision straightedge and feeler gauge, check the surface which contacts the cylinder head gasket for warpage.
Maximum
SEE MORE:
INSPECTION
PROCEDURE
1. INSPECT STEERING PAD SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
*a
Component without harness connected
(Steering Pad Switch Assembly)
*b
Up
*c
Down
INSPECTION PROCEDURE 1. INSPECT CYLINDER BLOCK FOR WARPAGE
(a) Using a precision straightedge and feeler gauge, check the surface which contacts the cylinder head gasket for warpage.
Maximum Warpage: 0.05 mm (0.00197 in.) HINT: If the warpage is more than the maximum, replace the cylinder
Precaution
Inspection
