Toyota Corolla Cross: Oil Pressure Switching Valve
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 REAR ENGINE UNDER COVER RH
51443C -
- -
2 OIL PRESSURE
INSPECTION PROCEDURE 1. INSPECT OIL PRESSURE CONTROL VALVE ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection C
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 OIL PRESSURE CONTROL VALVE ASSEMBLY
15250 -
- -
SEE MORE:
DESCRIPTION The No. 1 cooler thermistor is installed to the evaporator in the air conditioner unit to detect the temperature of the cooled air that has passed through the evaporator, which is used to control the air conditioning system. It sends signals to the air conditioning amplifier assembly. Th
MECHANICAL SYSTEM TESTS
SHIFT TIME LAG TEST
NOTICE:
This test must be performed after checking and confirming that the engine
is normal.
Perform this test with the CVT fluid temperature between 50 and 100°C (122
and 212°F).
Perform this test with the air conditioning off.
Perf
Removal
Evaporator Temperature Sensor Circuit Short to Ground (P053511)
