Toyota Corolla Cross: Instrument Panel Speaker
READ NEXT:
REMOVAL
CAUTION / NOTICE / HINT
COMPONENTS (REMOVAL)
Procedure
Part Name Code
1
FRONT DOOR OPENING TRIM WEATHERSTRIP
INSPECTION
PROCEDURE
1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY LH (w/o Stereo Component Amplifier)
(a) With the front No. 2 speaker assembly LH installed, check that
there is no looseness or other
INSTALLATION
CAUTION / NOTICE / HINT
COMPONENTS (INSTALLATION)
Procedure
Part Name Code
1
FRONT NO. 2 SPEAKER ASSEMBLY
SEE MORE:
DESCRIPTION
The airbag ECU assembly has a built-in yaw rate and acceleration
sensor and detects the vehicle condition.
The skid control ECU (brake actuator assembly) receives signals
from the yaw rate and acceleration sensor (airbag ECU assembly) via CAN communication.
These DTCs may be store
INSPECTION
PROCEDURE
1. INSPECT PRELOAD
(a) Using a 10 mm hexagon socket wrench, install the steering wheel assembly
set bolt to the steering main shaft.
NOTICE:
Do not apply excessive torque to the steering wheel assembly set
bolt by using a tool such as an impact
Removal
Multi-axis Acceleration Sensor Module "A" Circuit Voltage Out of Range (C05201C,...,C117828)
