Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

Use these procedures to troubleshoot the heated steering wheel system.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

INSPECT AUXILIARY BATTERY

(a) Measure the auxiliary battery voltage with the ignition switch off.

Standard voltage:

11 to 14 V (Ignition switch off)

If the voltage is below 11 V, replace or recharge the auxiliary battery before proceeding to the next step.

NEXT

3.

PROBLEM SYMPTOMS TABLE

HINT:

Refer to Problem Symptoms Table.

Click here

NEXT

4.

REPAIR OR REPLACE

NEXT

5.

CONFIRMATION TEST

NEXT

END

    READ NEXT:

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order

     Steering Column Assembly

     Disassembly

    DISASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (DISASSEMBLY) Procedure Part Name Code 1 UPPER STEERING COLUMN BRACKET W

    SEE MORE:

     Inspection

    INSPECTION PROCEDURE 1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition F-1 - F-3 Seat heater temperature 20°C (68°F) 3

     Auxiliary Transmission Fluid Pump Control Module Feedback Signal Circuit Short to Ground (P0C2B11)

    DESCRIPTION The oil pump of the continuously variable transaxle assembly stops operating when the engine is stopped by stop and start control. While the engine is stopped by stop and start control, the oil pump with motor assembly is operated continuously ensuring optimal continuously variable trans

    © 2020-2026 Copyright www.tcorollacross.com PT NL