Toyota Corolla Cross: Horn
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FRONT BUMPER ASSEMBLY
- -
- -
2 LOWER NO. 2 FRONT BUMPER RETAINE
INSPECTION PROCEDURE 1. INSPECT LOW PITCHED HORN ASSEMBLY
(a) Check the operation.
(1) Apply auxiliary battery voltage and check the operation of the low pitched horn assembly according to the t
SEE MORE:
DESCRIPTION The Malfunction Indicator Lamp (MIL) is used to indicate vehicle malfunctions detected by the ECM.
The MIL operation can be checked visually. When the ignition switch is first turned to ON, the MIL should be illuminated and should then turn off after the engine is started. If the MIL r
TERMINALS OF ECM
HINT:
The standard normal voltage and resistance between each pair of ECM terminals
is shown in the table below. The appropriate conditions for checking each pair of
terminals are also indicated. The result of checks should be compared with the standard
normal voltage and
Removal
MIL Circuit
