Toyota Corolla Cross: Front Evaporator Temperature Sensor
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 BLOWER ASSEMBLY
87130D -
- -
2 AIR CONDITIONING HARNESS
INSPECTION PROCEDURE 1. INSPECT NO. 1 COOLER THERMISTOR
(a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below.
*a Component without harness c
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 NO. 1 COOLER THERMISTOR
88625
- -
2 NO
SEE MORE:
DESCRIPTION The stop light switch assembly is part of a duplex system that transmits two signals: STP and ST1-. These two signals are used by the ECM to monitor whether or not the brake system is working properly. This DTC indicates that the stop light switch assembly remains on. When the stop light
OPERATION CHECK CHECK WINDSHIELD DEICER SYSTEM
(a) Turn the ignition switch to ON. (b) Check that the windshield deicer wire (windshield glass) becomes warm by operating the front wiper deicer switch.
(c) Confirm that windshield deicer system operation stops after approximately 15 minutes.
NOTICE
Removal
Brake Switch "B" Circuit Short to Battery (P070312)
