Toyota Corolla Cross: Fog Light Assembly
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FRONT BUMPER ASSEMBLY
- -
- -
2 FOG LIGHT ASSEMBLY
81220
INSPECTION PROCEDURE 1. INSPECT FOG LIGHT ASSEMBLY LH
(a) Check that the fog light assembly LH.
(1) Apply auxiliary battery voltage to the fog light assembly LH and check that the light illumina
ADJUSTMENT PROCEDURE 1. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT
(a) Prepare the vehicle:
Ensure that the vehicle body is not damaged or deformed around the fog lights.
Fill the fuel tank.
SEE MORE:
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced during vehicle inspection or
maintenance, performing initialization, registration or calibration may
be needed. Refer to Precaution for Safety Connect System.
Click here
Inspect the fuses f
DATA LIST / ACTIVE TEST DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
When performing an inspection, make sure that "ACC Customize" is set
Removal
Emergency Call Switch Illumination Circuit
