Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Customize Parameters

Toyota Corolla Cross (2022-2026) Service Manual / Vehicle Exterior / Sliding Roof / Convertible / Sliding Roof System / Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE SLIDING ROOF SYSTEM

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

Slide Roof

Tester Display

Description

Default

Setting

ECU

Wireless Key Related Operation Setting

Function to select tilt up or slide open of sliding roof key-linked function

Slide

$00:Slide,$01:Tilt

Main body ECU (Multiplex network body ECU)

Door Key Related Operation Setting

Function to select tilt up or slide open of sliding roof wireless transmitter-linked function

Slide

$00:Slide,$01:Tilt

Main body ECU (Multiplex network body ECU)

Roof Switch Auto Operation Setting

Function to enable/disable auto operation

Enable

$00:Disable,$01:Enable

Main body ECU (Multiplex network body ECU)
Power Window

Tester Display

Description

Default

Setting

ECU

Door Key P/W Up Function

Function to close the power windows and sliding roof using the mechanical key

Disable

$00:Disable,$01:Enable

Main body ECU (Multiplex network body ECU)

Door Key P/W Down Function

Function to open the power windows and sliding roof using the mechanical key

Disable

$00:Disable,$01:Enable

Main body ECU (Multiplex network body ECU)

P/W Up W/ Transmit Function

Function to close the power windows and sliding roof using the wireless transmitter

Disable

$00:Disable,$01:Enable

Main body ECU (Multiplex network body ECU)

P/W Down W/ Transmit Function

Function to open the power windows and sliding roof using the wireless transmitter

Disable

$00:Disable,$01:Enable

Main body ECU (Multiplex network body ECU)
Warning

Tester Display

Description

Default

Setting

ECU

Slide Roof Open Warning Function

Function to enable or disable the sliding roof open warning

Enable

$00:Disable,$01:Enable

Main body ECU (Multiplex network body ECU)

    READ NEXT:

     Initialization

    INITIALIZATION INITIALIZE SLIDING ROOF SYSTEM NOTICE: When the sliding roof glass sub-assembly or sliding roof drive cable sub-assembly is adjusted or removed/installed, or the sliding roof drive g

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of

     Terminals Of Ecu

    TERMINALS OF ECU CHECK SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY) (a) Disconnect the T12 sliding roof ECU (sliding roof drive gear sub-assembly) connector. (b) Measure the resistance a

    SEE MORE:

     Transmission Control Switch Circuit

    DESCRIPTION After moving the shift lever to M, it is possible to change the shift range between M1 and M10 using the shift lever. Moving the shift lever to "+" once raises the shift range by one, and moving the shift lever to "-" lowers the shift range by one. WIRING DIAG

     Fail-safe Chart

    FAIL-SAFE CHART If any of the following DTCs are stored, the engine stop and start ECU enters fail-safe mode to preserve vehicle operability. DTC Component Fail-safe Operation Fail-safe Deactivation Condition P033562 Open in engine speed signal circuit - All of the f

    © 2020-2026 Copyright www.tcorollacross.com PT NL