Toyota Corolla Cross: Auxiliary Battery

 Inspection

INSPECTION PROCEDURE 1. INSPECT PRELOAD (a) Using a 10 mm hexagon socket wrench, install the steering wheel assembly set bolt to the steering main shaft. NOTICE: Do not apply excessive torque to the steering wheel assembly set bolt by using a tool such as an impact

 Cold Start Idle Control System Performance (P050A00)

MONITOR DESCRIPTION A monitor will run when the engine is started at an engine coolant temperature of -10 (14°F) or higher, and less than 50°C (122°F). If certain conditions are met, a DTC will be stored after the engine idles for 15 seconds (2 trip detection logic). This DTC is designed to mon