Toyota Corolla Cross: Air Conditioning Pressure Sensor
READ NEXT:
ON-VEHICLE INSPECTION PROCEDURE
1. INSPECT AIR CONDITIONER PRESSURE SENSOR (a) Check the wire harness.
(1) Disconnect the A61 air conditioner pressure sensor connector. (2) Disconnect the I48 air
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
-
- -
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 AIR CONDITIONER PRESSURE SENSOR
88719A
- -
SEE MORE:
DESCRIPTION
Using the current from the TCM, the shift solenoid valve SLG controls the B1
brake when the shift lever is in R, and S1 synchronizer when the shift lever is
in P, N, D or M.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
DESCRIPTION The stop light switch assembly is part of a duplex system that transmits two signals: STP and ST1-. These two signals are used by the ECM to monitor whether or not the brake system is working properly. This DTC indicates that the stop light switch assembly remains on. When the stop light
On-vehicle Inspection
Pressure Control Solenoid "M" Circuit Short to Battery (P08C312)
