Toyota Corolla Cross: Adjusting the steering wheel and mirrors
READ NEXT:
Adjustment procedure
1. Hold the steering wheel and
push the lever down.
2. Adjust to the ideal position by
moving the steering wheel
horizontally and vertically.
After adjustment, pull the lever up
The rear view mirror's position
can be adjusted to
enable sufficient confirmation
of the rear view.
Adjusting the height of
rear view mirror
The height of the rear view mirror
can be adjusted to suit
The rear view mirror's position
can be adjusted to
enable sufficient confirmation
of the rear view.
■When using the outside rear
view mirrors in a cold weather
When it is cold and the outside rear
v
SEE MORE:
INITIALIZATION
NOTICE:
Initialization can be confirmed through the tire pressure warning light.
If the ignition switch is turned off during initialization, the tire pressure
warning ECU and receiver memorizes that initialization was being performed.
Therefore, it is not necessary to
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT RADIO SETTING CONDENSER
(a) With the radio setting condenser installed, check that there is
no looseness or other abnormalities.
(b) Measure the resistance of the radio setting condenser
according to the value(s) in the table below.
Steering wheel
Initialization
