Toyota Corolla Cross: System Diagram
SYSTEM DIAGRAM
READ NEXT:
CAUTION / NOTICE / HINT
HINT:
*: Use the GTS.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
TEST MODE PROCEDURE
REAR BRAKE PAD REPLACEMENT MODE
*1
Rear Disc Brake Piston
*2
Nut
*a
The nut moves inward in pad re
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptoms
are listed i
SEE MORE:
DESCRIPTION If the communication line (IMI - EFIO) between the hybrid vehicle control ECU and ID code box (immobiliser code ECU) is stuck high, the hybrid vehicle control ECU will store this DTC.
DTC No. Detection Item
DTC Detection Condition Trouble Area
Note B279A12
E
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT BRAKE FLUID LEVEL IN RESERVOIR
(a) Check the fluid level.
Brake Fluid:
SAE J1703 or FMVSS No. 116 DOT3
SAE J1704 or FMVSS No. 116 DOT4
NOTICE:
If using a dropper to adjust the fluid amount, make sure
that the dropper has no
How To Proceed With Troubleshooting
Engine Immobiliser System Circuit Short to Battery (B279A12)
