Toyota Corolla Cross: Rear Door
READ NEXT:
DISASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (DISASSEMBLY)
Procedure Part Name Code
1 PRECAUTION
-
- -
2 DISCONNECT CABLE FROM NEGATIVE
ADJUSTMENT CAUTION / NOTICE / HINT
*a Centering Bolt
*b Standard Bolt
HINT:
Centering bolts are used to install the door hinges to the vehicle body and door. The door cannot b
REASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (REASSEMBLY)
Procedure Part Name Code
1 DOOR WINDOW FRAME MOULDING CLIP
75792 -
- -
2 REAR DOOR DU
SEE MORE:
INSPECTION PROCEDURE 1. INSPECT KNOCK CONTROL SENSOR
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
1 - 2 25°C (77°F)
120 to 280 kΩ If the result is not as
DTC CHECK / CLEAR
DTC CHECK
(a) Turn the ignition switch off.
(b) Connect the GTS to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the GTS on.
(e) Read the DTCs following the prompts on the GTS.
Chassis > Brake/EPB > Trouble Codes
(f) Check the details of the DTCs.
NOTICE:
Disassembly
Inspection
