Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Precaution

PRECAUTION

PRECAUTION WHEN USING GTS

(a) After all DTCs are cleared, check if the malfunction occurs again 6 seconds after turning the ignition switch ON.

PRECAUTIONS FOR THE DOOR CONTROL TRANSMITTER ASSEMBLY

(a) The door control transmitter assembly is a precision instrument. Be sure to observe the following:

(1) Do not drop or strike the door control transmitter assembly.

(2) Do not allow the door control transmitter assembly to be kept in a high temperature place for a long time.

(3) Do not use an ultrasonic washing machine to clean the door control transmitter assembly.

(4) Keep the door control transmitter assembly away from magnets or magnetized items during use.

(5) Do not attach any stickers to the door control transmitter assembly.

PRECAUTION FOR REGISTRATION

(a) If replacing any of the following parts, refer to Registration.

Click here

NOTICE:

Any door control transmitter assemblies or ECUs for which registration has been performed cannot be reused.

(1) Door control transmitter assembly

(2) Transponder key ECU assembly

(3) ECM

    READ NEXT:

     Parts Location

    PARTS LOCATION ILLUSTRATION *1 ECM - - ILLUSTRATION *1 UNLOCK WARNING SWITCH ASSEMBLY *2 COMBINATION METER ASSEMBLY *3 SECURITY INDICATOR LIGHT

     System Diagram

    SYSTEM DIAGRAM

     System Description

    SYSTEM DESCRIPTION IMMOBILISER SYSTEM DESCRIPTION The immobiliser system is designed to prevent the vehicle from being stolen. This system uses the transponder key ECU assembly that stores the key I

    SEE MORE:

     Sub Woofer Speaker Cable Actuator Stuck (B1ADF71)

    DESCRIPTION This DTC is stored when the stereo component amplifier assembly detects an open in the sub-woofer speaker circuit by energizing the speaker line. DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from

     Brake Pressure Control Solenoid "A" Control Circuit Short to Battery (C13C012,...,C13C949)

    DESCRIPTION The ABS solenoid relay and master cylinder cut solenoid valves are built into the brake actuator assembly. Depending on the operating conditions, the master cylinder cut solenoid valves regulate the brake fluid pressure generated by the pump motor. When this DTC is stored, the fai

    © 2020-2025 Copyright www.tcorollacross.com PT NL