Toyota Corolla Cross: Power Window Regulator Motor (for Rear Door)
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 REAR DOOR GLASS SUB-ASSEMBLY
68104
- -
2 REAR DOOR WINDOW
INSPECTION PROCEDURE 1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
(a) Check the operation.
(1) Connect a positive (+) lead from the auxiliary battery to connector terminal N2-2 (B).
NOT
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 POWER WINDOW REGULATOR MOTOR ASSEMBLY
85710F
- -
2
SEE MORE:
MECHANICAL SYSTEM TESTS
SHIFT TIME LAG TEST
NOTICE:
This test must be performed after checking and confirming that the engine
is normal.
Perform this test with the CVT fluid temperature between 50 and 100°C (122
and 212°F).
Perform this test with the air conditioning off.
Perf
DESCRIPTION The sliding roof ECU (sliding roof drive gear sub-assembly) operates its built-in motor according to the sliding roof switch (map light assembly) operation. Using the sliding roof switch (map light assembly), if the sliding roof can be operated normally when 45 seconds or more have elaps
Removal
Mechanical System Tests
