Toyota Corolla Cross: If your vehicle has to be stopped
in an emergency
Only in an emergency, such
as if it becomes impossible
to stop the vehicle in the
normal way, stop the vehicle
using the following procedure:
Stopping the vehicle
1. Steadily step on the brake
pedal with both feet and
firmly depress it.
Do not pump the brake pedal
repeatedly as this will increase the
effort required to slow the vehicle.
2. Shift the shift lever to N.
If the shift lever is shifted to N
3. After slowing down, stop the
vehicle in a safe place by the
road.
4. Stop the engine.
If the shift lever cannot be
shifted to N
3. Keep depressing the brake
pedal with both feet to reduce
vehicle speed as much as
possible.
4. Vehicles without a smart key
system: Stop the engine by turning the engine switch to
ACC.
4. Vehicles with a smart key
system: To stop the engine,
press and hold the engine
switch for 2 consecutive seconds
or more, or press it
briefly 3 times or more in succession.
5. Stop the vehicle in a safe
place by the road.
WARNING
■If the engine has to be turned
off while driving
- Power assist for the brakes and
steering wheel will be lost, making
the brake pedal harder to
depress and the steering wheel
heavier to turn. Decelerate as
much as possible before turning
off the engine.
- Vehicles without a smart key
system: Never attempt to
remove the key.
READ NEXT:
This vehicle is not designed
to be able to drive on roads
that are deeply flooded with
water. Do not drive on roads
where the roads may be
submerged or the water
may be rising. It is dangerous
to rema
If towing is necessary, we
recommend having your
vehicle towed by your Toyota
dealer or commercial
towing service, using a
wheel-lift type truck or flatbed
truck.
Use a safety chain system
for all to
SEE MORE:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 BRAKE MASTER CYLINDER SUB-ASSEMBLY
47201 -
- -
2 VACUUM SENSOR ASSEMBLY
89420H -
- -
3 VACUUM SENSOR GROMMET
- -
-
INSTALLATION
CAUTION / NOTICE / HINT
COMPONENTS (INSTALLATION)
Procedure
Part Name Code
1
REAR STABILIZER BAR BUSH
48818
-
-
2
REAR NO. 1 STABILI