Toyota Corolla Cross: Fuel Sender Gauge Assembly
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
77020A -
- -
INSPECTION PROCEDURE 1. INSPECT FUEL SENDER GAUGE ASSEMBLY
CAUTION: Perform the inspection in a well-ventilated area. Do not perform the inspection near an open flame.
(a) Check that the float mov
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 FUEL SENDER GAUGE ASSEMBLY
83320
- -
2
SEE MORE:
DESCRIPTION
The skid control ECU (brake actuator assembly) compares the
calculated steering angle value based on the yaw rate sensor value with the actual
steering angle value of the steering sensor.
DTC No.
Detection Item
DTC Detection Condition
Tro
DESCRIPTION Refer to DTC P001001. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P136001 "A" Camshaft Position Actuator Bank 1 General Electrical Failure
While engine is running, malfunction in rotation signal (VTS) of cam ti
Removal
Steering Angle Sensor Module Circuit Voltage Out of Range (C05261C)
