Toyota Corolla Cross: Front Seat Assembly (for Power Seat)
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 PRECAUTION
-
- -
2 FRONT SEAT HEADREST ASSEMBLY
DISASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (DISASSEMBLY)
Procedure Part Name Code
1 FRONT SEAT INNER BELT ASSEMBLY
73240 -
- -
2 FR
INSPECTION PROCEDURE 1. INSPECT FRONT SEAT ADJUSTER ASSEMBLY
(a) Check the operation of the slide motor.
(1) Check that the seat cushion moves smoothly when the auxiliary battery is connected
SEE MORE:
DESCRIPTION
The ABS solenoid relay and solenoid valves are built into the
brake actuator assembly.
The front solenoid valve LH controls the brake fluid pressure
of the front wheel cylinder LH of the vehicle.
When this DTC is stored, the fail-safe function operates and
the ABS solenoid relay
DESCRIPTION Refer to DTC P032511. Click here
HINT: When DTC P032515 is stored, the ECM enters fail-safe mode. During fail-safe mode, the ignition timing is delayed to its maximum retardation. Fail-safe mode continues until the ignition switch is turned off.
DTC No. Detection Item
DT
Removal
Left Front Wheel ABS Hold Solenoid Control Circuit Short to Battery (C12A512,...,C12B049)
