Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Fail-safe Chart

FAIL-SAFE CHART

If any of the following DTCs are stored, the hybrid vehicle control ECU enters fail-safe mode to allow the vehicle to be driven temporarily.

Charging System

DTC No.

Fail-safe Operation

Fail-safe Deactivation Condition

P058A01

P162B87

DC/DC converter command is fixed.

Condition returns to normal.

    READ NEXT:

     Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST (a) According to the display on the GTS, read the Data List. Click here ACTIVE TEST (a) According to the display on the GTS, perform the appropriate Active Tes

     Diagnostic Trouble Code Chart

    DIAGNOSTIC TROUBLE CODE CHART Charging System DTC No. Detection Item Warning Indicate Note Link P058A01 Auxiliary B

     On-vehicle Inspection

    ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT PROCEDURE 1. CHECK AUXILIARY BATTERY (a) Check that the auxiliary battery cables are connected to the correct terminals. If they are not, connect the

    SEE MORE:

     Camshaft Position "A" Actuator Bank 1 General Electrical Failure (P001001)

    DESCRIPTION The VVT-iE system adjusts the intake valve timing using a motor. Compared to conventional hydraulic VVT systems, the valve timing can be adjusted within a wider range and can be retarded more when starting the engine. As the VVT-iE system can operate at low engine speeds and when the eng

     Operation Check

    OPERATION CHECK CHECK BASIC OPERATIONS NOTICE: Using the multi-information display (combination meter assembly), check that the rear seat reminder function is set to ON. Click here HINT: Use the same procedure as for the RH side. If a higher priority notification is displayed on the

    © 2020-2026 Copyright www.tcorollacross.com PT NL