Toyota Corolla Cross: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Charging System
|
DTC No.
|
Detection Item
|
Warning Indicate
|
Note
|
Link
|
|
P058A01
|
Auxiliary Battery Monitor Module Range/Performance
|
Charge warning light does not come on
|
SAE Code: P058A
|
.gif)
|
|
P162B87
|
Lost Communication with Battery Monitor Module Missing Message
|
Charge warning light does not come on
|
SAE Code: P162B
|
|
READ NEXT:
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
PROCEDURE
1. CHECK AUXILIARY BATTERY
(a) Check that the auxiliary battery cables are connected to the correct terminals.
If they are not, connect the
DESCRIPTION
The battery state sensor assembly detects the auxiliary voltage, current and
temperature of the auxiliary battery. The battery state sensor assembly calculates
State of Charge (SOC) b
DESCRIPTION
The hybrid vehicle control ECU communicates with the battery state sensor assembly
via LIN communication. If a LIN communication error is detected, the hybrid vehicle
control ECU stor
SEE MORE:
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the susp
INSPECTION
PROCEDURE
1. INSPECT PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(a) Using a dial indicator, measure the runout of the intermediate shaft
assembly.
Maximum Runout:
0.6 mm (0.0236 in.)
NOTICE:
The dial indicator must be set at a right angle to the center of
