Toyota Corolla Cross: Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
(a) According to the display on the GTS, read the Data List.
Click here .gif)
ACTIVE TEST
(a) According to the display on the GTS, perform the appropriate Active Test.
Click here
READ NEXT:
DIAGNOSTIC TROUBLE CODE CHART
Charging System
DTC No.
Detection Item
Warning Indicate
Note
Link
P058A01
Auxiliary B
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
PROCEDURE
1. CHECK AUXILIARY BATTERY
(a) Check that the auxiliary battery cables are connected to the correct terminals.
If they are not, connect the
DESCRIPTION
The battery state sensor assembly detects the auxiliary voltage, current and
temperature of the auxiliary battery. The battery state sensor assembly calculates
State of Charge (SOC) b
SEE MORE:
ADJUSTMENT
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration)
that must be performed after parts are removed and installed, or replaced during
the CVT fluid replacement are shown below.
Necessary Procedure After Parts Removed/Installed/
MONITOR DESCRIPTION The Transmission Control Module (TCM) and ECM perform 2-way communication with each other via the Controller Area Network (CAN). The TCM sends signals to the ECM concerning required engine speed, required engine torque, warning indicators in the combination meter assembly, DTCs a
