Toyota Corolla Cross: Driving support system
information display
■ Driving support system
information
Select to display the operational
status of the following systems:
- Dynamic radar cruise control
- LTA (Lane Tracing Assist)
- LDA (Lane Departure Alert)
■ Navigation system-linked
display (if equipped)
Select to display the following
navigation system-linked information:
- Route guidance to destination
- Compass display (heading-
up display)
Audio system-linked display
(if equipped)
Select to enable selection of an
audio source or track on the
meter using the meter control
switches.
This menu icon can be set to be
displayed/not displayed in
.
READ NEXT:
■ Drive information
Displays drive information such as
the following:
Drive information 1
Drive information 2
Displays the following depending
on which drive information
type and drive informat
■ Meter display settings that
can be changed
Language
Select to change the language displayed.
Units
Select to change the units of measure
displayed.
Meter Type
Select to change the meter t
Displays suggestions to the
driver in the following situations.
To select a response to a displayed
suggestion, use the
meter control switches.
■ Suggestion to enable the
power back door (if
equipp
SEE MORE:
DESCRIPTION When the drive mode select switch (combination switch assembly) is operated, a switch signal is sent to the hybrid vehicle control ECU and the hybrid vehicle control ECU changes the drive mode. WIRING DIAGRAM
PROCEDURE
1. READ VALUE USING GTS (CAN BUS CHECK)
Cl
DESCRIPTION
This DTC is output when the clearance warning ECU assembly detects
lost communication with the blind spot monitor sensor.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
U117787
Lost Communication wit
