Toyota Corolla Cross: Driving support system
information display
■ Driving support system
information
Select to display the operational
status of the following systems:
- LTA (Lane Tracing Assist)
- LDA (Lane Departure Alert)
- PCS (Pre-Collision System)
- Dynamic radar cruise control
- RSA (Road Sign Assist) (if
equipped)
■ Navigation system-linked
display (if equipped)
Select to display the following
navigation system-linked information:
- Route guidance to destination
- Compass display (heading-
up display)
Audio system-linked display
(if equipped)
Select to enable selection of an
audio source or track on the
meter using the meter control
switches.
This menu icon can be set to be
displayed/not displayed in 
.
READ NEXT:
■ Drive information
Displays drive information such as
the following:
Drive information type
Drive information items
Displays the following depending
on which drive information type and drive i
■ Meter display settings that
can be changed
Language
Select to change the language displayed.
Units
Select to change the units of measure
displayed.
Eco Driving Indicator Light
Select to e
Stop & Start system operation
status notification
Displays the status of the Stop &
Start system with a pop-up display.
Stop & Start system settings
The length of time of the Stop &
SEE MORE:
DESCRIPTION The certification ECU (smart key ECU assembly) generates a request signal and transmits the signal to the front door outside handle assembly RH (electrical key antenna) at intervals of 0.25 seconds. For the front door outside handle assembly RH (electrical key antenna) to detect when the
UTILITY
DESCRIPTION
(a) Refer to the table below and then perform the necessary operation
according to the part to be replaced in order to perform calibration.
Parts to be Replaced / Operation
Necessary Operation
Skid control ECU (brake actuator assembly)
