Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Settings display

■ Meter display settings that can be changed

  • Language

Select to change the language displayed.

  • Units

Select to change the units of measure displayed.

  • Eco Driving Indicator Light

Select to enable/disable the Eco Driving Indicator Light.

Fuel economy display

Select to change the average fuel consumption display between after start/after reset.

Select to display/not display the audio system linked display.

Select to change the displayed content of the following:

  • Drive information type

Select to change the drive information type display between after start/after reset.

  • Drive information items

Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time.

  • Pop-up display

Select to enable/disable pop-up displays for each relevant system.

  • Multi-information display off

Select to turn the multi-information display off.

To turn the multi-information display on again, press any of the following meter control switches

.

  • Default setting

Select to reset the meter display settings to the default setting.

■Suspension of the settings display

  • Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.

  • If a warning message is displayed, operation of the settings display will be suspended.

WARNING

■Cautions during setting up the display

If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation.

In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.

This may lead to death or a serious health hazard.

NOTICE

■During setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the display features.

    READ NEXT:

     Stop & Start system information

    Stop & Start system operation status notification Displays the status of the Stop & Start system with a pop-up display. Stop & Start system settings The length of time of the Stop &

     Multi-information display (7-inch display)

     Display and menu icons

    ■ Display Content display area By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used

    SEE MORE:

     Cold Start Fuel Injection Control Performance #1 (P128300-P128600)

    DESCRIPTION To improve emissions immediately after a cold start, cold start multi pulse fuel injection control is performed which divides a single pulse of the direct fuel injector into several smaller pulses. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE NOTICE: Before replacing the main body ECU (multiplex network body ECU), refer to Registration.*1 for HEV Model: Click here for Gasoline Model: Click here *1: w/ Smart Key System HINT: Use the table below to help determine the cause of problem symp

    © 2020-2025 Copyright www.tcorollacross.com PT NL