Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Display and menu icons

■ Display

Vehicle status information and indicators

  1. Content display area

By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed. The multi-information display can also be used to change display settings and other vehicle settings.

Warning or advice pop-up displays are also displayed in certain situations.

  1. Driving support system status display area

Displays an image when the following systems are operating and a menu icon other than is selected:

  • LTA (Lane Tracing Assist)
  • LDA (Lane Departure Alert)
  • Dynamic radar cruise control

■ Menu icons

The menu icons will be displayed by pressing the or meter control switch.

Driving information display

Driving support system information display

Audio system-linked display (if equipped)

Vehicle information display

Settings display

Warning message display

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display.

WARNING

■Caution for use while driving

  • When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle.
  • Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle.

    READ NEXT:

     Changing the meter display

    The multi-information display is operated using the meter control switches. : Select menu icons, scroll the screen and move the cursor : Change displayed content, scroll the screen and mov

     Driving support system information display

    ■ Driving support system information Select to display the operational status of the following systems: Dynamic radar cruise control LTA (Lane Tracing Assist) LDA (Lane Departure Alert) ■ Nav

     Vehicle information display

    ■ Drive information Displays drive information such as the following: Drive information 1 Drive information 2 Displays the following depending on which drive information type and drive informat

    SEE MORE:

     On-vehicle Inspection

    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT ACTUATOR MOTOR OPERATION (a) Turn the motor relay on and check for actuator motor operation sounds. Chassis > Brake/EPB > Active Test Tester Display Motor Relay NOTICE: Do not keep the motor relay on conti

     Diagnosis System

    DIAGNOSIS SYSTEM DESCRIPTION (a) Blind spot monitor data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and to perform repairs. CHECK DLC3 (a) Check the

    © 2020-2026 Copyright www.tcorollacross.com PT NL