Toyota Corolla Cross: Door Control Transmitter (w/ Smart Key System)
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 CUT KEY
69503B
- -
2 TRANSMITTER HOUSING COVER
INSPECTION PROCEDURE 1. INSPECT TRANSMITTER BATTERY
(a) Inspect the operation of the electrical key transmitter sub-assembly.
(1) Remove the transmitter battery from the electrical key transmitter
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 TRANSMITTER BATTERY
89745C
- -
2 TRANS
SEE MORE:
DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate that the resolver output signal is abnormal. The cause of this malfunction may be one of the following:
Area Main Malfunction Description
Inverter low-voltage circuit
The connectors are not connected properly
R
DESCRIPTION The hybrid vehicle control ECU detects malfunctions which prevent the generator (MG1) inverter, motor (MG2) inverter and rear motor (MGR) inverter shutdown circuit from shutting down the hybrid vehicle control system.
DTC No. Detection Item
DTC Detection Condition
Tr
Removal
Drive Motor "B" Position Sensor Signal Amplitude < (P0A4521,P0A1C47,P0A4522,P1C2C49)
