Toyota Corolla Cross: Diagnosis System
DIAGNOSIS SYSTEM
DESCRIPTION
(a) Diagnostic Trouble Codes (DTCs) for the telematics system can
be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems
to be malfunctioning, use the GTS to check for malfunctions and to repair it.
CHECK DLC3
(a) Check the DLC3.
Click here .gif)
READ NEXT:
DATA LIST / ACTIVE TEST
NOTICE:
In the table below, the values listed under "Normal Condition" are
reference values. Do not depend solely on these reference values when deciding whether
DIAGNOSTIC TROUBLE CODE CHART
Telematics System
DTC No.
Detection Item
Link
U014087
Lost Communication with Body Control Module Missing
DESCRIPTION
These DTCs are stored when a malfunction occurs in the CAN communication
circuit.
DTC No.
Detection Item
DTC Detection Condition
Trouble Are
SEE MORE:
CHECK FOR INTERMITTENT PROBLEMS HINT: Inspect the vehicle ECM using check mode. Intermittent problems are easier to detect with the GTS when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2
DESCRIPTION The hybrid vehicle control ECU and compressor with motor assembly communicate via direct line. Compressor control is stopped and this DTC is stored if communication information is cut off or abnormal information is received.
This DTC is also detected if high-voltage electricity supplie
