Toyota Corolla Cross: Cooling Fan Motor
READ NEXT:
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT
CAUTION: To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when inspecting the coo
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 INVERTER WATER PUMP WITH MOTOR ASSEMBLY
G9040 -
- -
2 D
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 COOLING FAN MOTOR
16363 -
- -
2 NO. 2 COOLING
SEE MORE:
DESCRIPTION
The airbag ECU assembly has a built-in yaw rate and acceleration
sensor and detects the vehicle condition.
The skid control ECU (brake actuator assembly) receives signals
from the yaw rate and acceleration sensor (airbag ECU assembly) via CAN communication.
The DTC is also stored
ON-VEHICLE INSPECTION PROCEDURE
1. FUEL PUMP ASSEMBLY OPERATION (a) Check fuel pressure. (1) Connect the GTS to the DLC3.
(2) Turn the power switch on (IG). (3) Turn the GTS on. (4) Put the engine in Inspection Mode (Maintenance Mode). Powertrain > Hybrid Control > Utility
Tester D
On-vehicle Inspection
Multi-axis Acceleration Sensor Module "A" Missing Calibration (C051D54,C121054)
