Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Central Gateway ECU System Internal Failure (B102004)

Toyota Corolla Cross (2022-2025) Service Manual / Power Source & Network / Networking / Can Communication System (for Hev Model) / Central Gateway ECU System Internal Failure (B102004)

DESCRIPTION

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Note

B102004

Central Gateway ECU System Internal Failure

A malfunction in the non-volatile storage of the central gateway ECU (network gateway ECU) is detected.

Central gateway ECU (network gateway ECU)

DTC Output from

  • Central gateway ECU (network gateway ECU)

PROCEDURE

1.

RECONFIRM DTC OUTPUT
Body Electrical > Central Gateway > Trouble Codes

Result

Proceed to

B102004 is output

A

B102004 is not output

B
A

REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)

B

USE SIMULATION METHOD TO CHECK

    READ NEXT:

     Lost Communication with Drive Motor Control Module "A" (U011000,U111A87,U115087,U115487,U115887,U117008,U117087)

    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Note U011000 Lost Communication with Drive M

     Lost Communication with Hybrid/EV Battery Energy Control Module "A" Missing Message (U011187,U01BD87,U115087,U117B87)

    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Note U011187 Lost Communication with Hybrid/

     Check CAN Communication Connection

    DESCRIPTION Symptom Trouble Area Check CAN Communication Connection CAN main bus line, CAN branch line or connector Power source circuit of

    SEE MORE:

     Right Rear Wheel Speed Sensor Signal Stuck Low (C051223)

    DESCRIPTION Refer to DTC C051212 Click here DTC No. Detection Item DTC Detection Condition Trouble Area C051223 Right Rear Wheel Speed Sensor Signal Stuck Low When the vehicle is driven from 0 km/h to 12 km/

     Air Inlet Damper Control Servo Motor Actuator Stuck Off (B143B7F)

    DESCRIPTION The No. 1 blower damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air inlet damper to the appropriate

    © 2020-2025 Copyright www.tcorollacross.com PT NL