Toyota Corolla Cross: Utility
UTILITY
INITIALIZE THE CONNECTION INFORMATION OF A GATEWAY FUNCTION EQUIPPED ECU (BUS
MONITOR ECU)
(a) Initialize the ECU.
Body Electrical > Central Gateway > Utility
|
Tester Display
|
|
Initialization
|
Body Electrical > Main Body > Utility
|
Tester Display
|
|
Initialization
|
READ NEXT:
TERMINALS OF ECU
NOTICE:
After the ignition switch is turned off, there may be a waiting time before
disconnecting the negative (-) auxiliary battery terminal.
Click here
When disconn
DIAGNOSIS SYSTEM
NOTICE:
The following communication bus check screen is provided only as an example.
This screen differs from the actual screen for this vehicle.
Description of "Communicati
DATA LIST / ACTIVE TEST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference
values. Do not depend solely on these reference values when deciding whether
SEE MORE:
DESCRIPTION
The ABS solenoid relay and solenoid valves are built into the
brake actuator assembly.
The front solenoid valve LH controls the brake fluid pressure
of the front wheel cylinder LH of the vehicle.
When this DTC is stored, the fail-safe function operates and
the ABS solenoid relay
DESCRIPTION The light control LED ECU supplies internally boosted voltage to the light control LED ECU so that the current supplied to the LED is always maintained at a constant value.
These DTCs are also output when the main body ECU (multiplex network body ECU) detects malfunctions while monitori
