Toyota Corolla Cross: Utility
READ NEXT:
SOFTWARE VERSION CONFIRMATION
PROCEDURE
1. NECESSITY OF SOFTWARE UPDATE CONFIRMATION
NOTICE:
If the GTS is connected and an operation such as a health check
is performed when OTA reprogramming i
SOFTWARE UPDATE
CAUTION / NOTICE / HINT
HINT:
After replacing the forward recognition camera due to a system malfunction,
make sure to perform "Software Update".
The software of the fo
h1 {color:red;} h2 {color:blue;} h3 {color:green;}
SEE MORE:
DESCRIPTION Refer to DTC P011011. Click here
HINT: When DTC P011015 is stored, the ECM enters fail-safe mode. During fail-safe mode, the intake air temperature is estimated to be 20°C (68°F) by the ECM. Fail-safe mode continues until a pass condition is detected, and the ignition switch is the
PRECAUTION
SENSOR EXPRESSIONS
(a) The descriptions for the blind spot monitor sensors differ
depending on the system. The expressions listed in the table below are used in this
Repair Manual.
Part Name
Actual Part Name
Blind spot monitor sensor LH (B)
Software Version Confirmation
Intake Air Temperature Sensor 1 Bank 1 Circuit Short to Battery or Open (P011015)
