Toyota Corolla Cross: Spiral Cable
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 STEERING WHEEL ASSEMBLY
45100 -
- -
2 ALIGN FRONT WHEEL
INSPECTION PROCEDURE 1. INSPECT SPIRAL CABLE SUB-ASSEMBLY
NOTICE:
Do not remove the steering sensor from the spiral cable sub-assembly when inspecting the spiral cable sub-assembly.
Remove
INSTALLATION CAUTION / NOTICE / HINT
Procedure Part Name Code
1 INSPECT SPIRAL CABLE SUB-ASSEMBLY
-
- -
2 STEERING SENSOR
SEE MORE:
DESCRIPTION HINT: These DTCs relate to the accelerator pedal position sensor.
Refer to DTC P212012. Click here
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P21382B Throttle/Pedal Position Sensor/Switch "D"/"E" Voltage Correlation Signal Cro
REPLACEMENT
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration)
that must be performed after parts are removed and installed, or replaced during
the CVT fluid replacement are shown below.
Necessary Procedure After Parts Removed/Installed
Removal
Throttle/Pedal Position Sensor/Switch "D"/"E" Voltage Correlation Signal Cross Coupled (P21382B)
