Toyota Corolla Cross: Smart Key System (for Entry Function, Gasoline Model)
READ NEXT:
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE (-) AUXILIARY BATTERY TERMINAL
NOTICE: After the ignition switch is turned off, there may be a waiting time before disconnecting the negat
PARTS LOCATION ILLUSTRATION
*A w/ Power Back Door System
- -
*1 FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH
*2 FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH
*3 REAR
SYSTEM DIAGRAM SMART KEY SYSTEM (for Entry Function)
SMART KEY SYSTEM (for Start Function)
Click here POWER DOOR LOCK CONTROL SYSTEM
Click here WIRELESS DOOR LOCK CONTROL SYSTEM
Click her
SEE MORE:
DESCRIPTION The condition of the windshield wiper switch assembly is detected and sent to the steering sensor in this circuit. WIRING DIAGRAM
PROCEDURE
1.
READ VALUE USING GTS (STEERING ANGLE SENSOR)
(a) Read the Data List according to the display on the GTS. Chassis > Steering A
TERMINALS OF ECU
NOTICE:
DTCs may be output when connectors are disconnected during inspection.
Therefore, be sure to clear the DTCs using the GTS once the inspection has
been completed.
Do not apply excessive force to the forward recognition camera connector.
CHECK FORWARD