Toyota Corolla Cross: Removal

Toyota Corolla Cross (2022-2025) Service Manual / Vehicle Interior / Seat Belt / Rear Seat Inner Belt Assembly (for Lh Side) / Removal

REMOVAL

CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)

Procedure		Part Name Code
1	REAR CENTER SEAT OUTER BELT ASSEMBLY	73350C	-	-	-
2	BENCH TYPE REAR SEAT CUSHION ASSEMBLY	-		-	-
3	REAR SEAT CUSHION LOCK HOOK	72693	-	-	-
4	REAR SEAT INNER BELT ASSEMBLY	73480	-	-	-

*A	for Gasoline Model	*B	for HEV Model
●	Non-reusable part	-	-

PROCEDURE

1. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

Click here

2. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

for Gasoline Model:
Click here
for HEV Model:
Click here

3. REMOVE REAR SEAT CUSHION LOCK HOOK

Click here

4. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY

HINT:

The bolt cannot be removed from the rear seat inner with center belt assembly.

SEE MORE:

System Malfunction Message is Displayed on the Multi-information Display

SYSTEM DESCRIPTION If an abnormal vehicle speed information is detected by the certification ECU (smart key ECUassembly), a system malfunction message is displayed on the multi-information display. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: When using the GTS with the ignition switch of

Steering Angle Sensor Module Circuit Voltage Out of Range (C05261C)

DESCRIPTION The skid control ECU (brake actuator assembly) compares the calculated steering angle value based on the yaw rate sensor value with the actual steering angle value of the steering sensor. DTC No. Detection Item DTC Detection Condition Tro

Toyota Corolla Cross: Removal

READ NEXT:

Inspection

Installation

Rear Seat Inner Belt Assembly (for Rh Side)

SEE MORE:

System Malfunction Message is Displayed on the Multi-information Display

Steering Angle Sensor Module Circuit Voltage Out of Range (C05261C)