Toyota Corolla Cross: Precaution
PRECAUTION
HINT:
- Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should be used as a reference only.
- When both standard and maximum or minimum values are listed for an inspection, use the standard value as a reference only and base any judgments on the maximum and minimum values.
READ NEXT:
DISASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (DISASSEMBLY)
Procedure Part Name Code
1 VALVE SPRING RETAINER LOCK
13741A
- -
2
INSPECTION PROCEDURE 1. INSPECT CYLINDER HEAD SUB-ASSEMBLY
(a) Using a precision straightedge and feeler gauge, measure the warpage of the contact surfaces where the cylinder head sub-assembly conta
REASSEMBLY CAUTION / NOTICE / HINT COMPONENTS (REASSEMBLY)
Procedure Part Name Code
1 INTAKE VALVE GUIDE BUSH
11122
- -
2 EXHAUS
SEE MORE:
DESCRIPTION
A magnet is installed to the shift fork. When the TCM commands the S1 synchronizer
to move, the shift fork moves the S1 synchronizer together and the magnet.
The Hall IC built into the shift stroke sensor converts the magnet position into
a voltage signal and sends it to the TCM. T
DESCRIPTION
These DTCs are stored when the radio receiver assembly detects
a malfunction in the CAN communication circuit.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
DTC Output from
Priority
U0100
