Toyota Corolla Cross: Parts Location
PARTS LOCATION
ILLUSTRATION
|
*1 | NO. 1 ENGINE ROOM RELAY BLOCK ASSEMBLY
- DEICER FUSE - ECU-IGP NO. 2 FUSE - DEICER RELAY |
*2 | WINDSHIELD DEICER WIRE (WINDSHIELD GLASS) |
ILLUSTRATION
|
*1 | FRONT WIPER DEICER SWITCH |
*2 | AIR CONDITIONING AMPLIFIER ASSEMBLY |
|
*3 | AIR CONDITIONING CONTROL ASSEMBLY |
*4 | DLC3 |
READ NEXT:
SYSTEM DESCRIPTION GENERAL The windshield deicer system uses thin heater wires attached to the inside of the windshield glass to help deice the window surface more quickly. An indicator light illumina
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the windshield deicer system.
*: Use the GTS.
PROCEDURE
1. VEHICLE BROUGHT TO WORKSHOP
NEXT
SEE MORE:
Perform cleaning in a manner
appropriate to each
component and its material.
Protecting the vehicle
interior
Remove dirt and dust using a
vacuum cleaner. Wipe dirty
surfaces with a cloth dampened
with lukewarm water.
If dirt cannot be removed,
wipe it off with a soft cloth
dampened with neut
DESCRIPTION The air conditioner pressure sensor, which is installed to the high pressure side pipe to detect refrigerant pressure, sends a refrigerant pressure signal to the air conditioning amplifier assembly. The air conditioning amplifier assembly converts this signal to a pressure value accordin
