Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

  • Replace parts related to the wireless door lock and smart key system according to the inspection procedure.
  • If the wireless door lock and smart key system does not operate, first check the customize item and make sure that the wireless door lock and smart key system is not turned off.
  • The wireless door lock and smart key system primarily uses the following systems.
    • Power door lock system
    • Wireless door lock system
    • Smart key system (for Entry Function)
    • Smart key system (for Start Function)
      • : Immobiliser function
  • Perform troubleshooting procedures with other registered keys if available.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

(a) Confirm how vehicle was brought to workshop

  • Vehicle was driven
  • Vehicle was towed

HINT:

The malfunction location may be narrowed down by confirming whether the vehicle was driven or towed.

NEXT

GO TO SMART KEY SYSTEM (for Start Function)

    READ NEXT:

     Operation Check

    OPERATION CHECK CHECK CUSTOMIZE PARAMETERS NOTICE: The operation check below is based on the non-customized initial condition of the vehicle. Click here CHECK THE ENTRY UNLOCK FUNCTION (a) Che

     Customize Parameters

    CUSTOMIZE PARAMETERS CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM Click here CUSTOMIZE SMART KEY SYSTEM (for Entry Function) HINT: The following items can be customized. NOTICE: When the cu

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE HINT: If a problem occurs in certain locations or at certain times of day, check for the possibility of wave interference. When the electrical key transmitter sub-ass

    SEE MORE:

     Installation

    INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION) Procedure Part Name Code 1 CAM TIMING CONTROL MOTOR O-RING 13090E - - 2 CAM TIMING CONTROL MOTOR WITH EDU ASSEMBLY 13090D - - N

     Engine Immobiliser System Circuit Short to Battery (B279A12)

    DESCRIPTION If the communication line (IMI - EFIO) between the ECM and ID code box (immobiliser code ECU) is stuck high, the ECM will store this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area Note B279A12 Engine Immobiliser System Circuit Short to Batt

    © 2020-2026 Copyright www.tcorollacross.com PT NL