Toyota Corolla Cross: Headlight aim
Vertical movement adjusting
bolts
- Adjustment bolt A
- Adjustment bolt B
Before checking the headlight
aim
- Make sure the vehicle has a
full tank of gasoline and the
area around the headlight is
not deformed.
- Park the vehicle on level
ground.
- Make sure the tire inflation
pressure is at the specified
level.
- Have someone sit in the
driver's seat.
- Bounce the vehicle several
times.
Adjusting the headlight
aim
1. Using a Phillips-head screwdriver,
turn bolt A in either
direction.
Remember the turning direction
and the number of turns.
2. Turn bolt B the same number
of turns and in the same
direction as step 1.
If the headlight cannot be adjusted
using this procedure, take the vehicle
to your Toyota dealer to adjust
the headlight aim.
READ NEXT:
You may replace the following
bulbs yourself. The difficulty
level of replacement
varies depending on the
bulb. If necessary bulb
replacement seems difficult
to perform, contact your
Toyota dealer.
F
Basic rules and instructions for handling unforeseen circumstances or issues that may emerge while driving are given to drivers in this section. In order to help drivers safely and successfully negoti
SEE MORE:
INSPECTION PROCEDURE 1. INSPECT NO. 2 AIR FUEL RATIO SENSOR
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
1 (HA1B) - 2 (+B)
20°C (68°F) 2 to 6 Ω
1 (H
DESCRIPTION The engine stop and start ECU detects whether the engine hood is open or closed based on a signal received from the engine hood courtesy switch built into the hood lock with courtesy light switch assembly.
The engine stop and start ECU prohibits starting of the engine by stop and start
