Toyota Corolla Cross: Front Door Lock
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 PRECAUTION
-
- -
2 CABLE FROM NEGATIVE AUXILIARY
INSPECTION PROCEDURE 1. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH
(a) Check the door lock motor operation. (1) Apply auxiliary battery voltage to the motor connector and check the operation
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 FRONT DOOR INSIDE LOCK AND UNLOCK KNOB LOCKING CABLE
69760B -
SEE MORE:
INSPECTION
PROCEDURE
1. INSPECT PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(a) Using a dial indicator, measure the runout of the intermediate shaft
assembly.
Maximum Runout:
0.6 mm (0.0236 in.)
NOTICE:
The dial indicator must be set at a right angle to the center of
DESCRIPTION The ECM and MG ECU send and receive signals via CAN communication.
If a communication error occurs between the ECM and MG ECU, the ECM illuminates the MIL and stores this DTC.
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
U115487 L
Removal
Inspection
