Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Diagnostic Trouble Code Chart

Toyota Corolla Cross (2022-2025) Service Manual / Suspension / Tire Pressure Monitoring / Tire Pressure Warning System / Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

Tire Pressure Warning System

DTC No.

Detection Item

Link

C214187

Tire Pressure Monitor Transmitter ID 1 Missing Message

C214196

Tire Pressure Monitor Transmitter ID 1 Component Internal Failure

C214287

Tire Pressure Monitor Transmitter ID 2 Missing Message

C214296

Tire Pressure Monitor Transmitter ID 2 Component Internal Failure

C214387

Tire Pressure Monitor Transmitter ID 3 Missing Message

C214396

Tire Pressure Monitor Transmitter ID 3 Component Internal Failure

C214487

Tire Pressure Monitor Transmitter ID 4 Missing Message

C214496

Tire Pressure Monitor Transmitter ID 4 Component Internal Failure

C217604

Tire Pressure Monitor Module System Internal Failure

U012987

Lost Communication with Brake System Control Module "A" Missing Message

    READ NEXT:

     VEHICLE CONTROL HISTORY (RoB)

    VEHICLE CONTROL HISTORY (RoB) DESCRIPTION Vehicle Control History (RoB) is a function that captures and stores ECU data when triggered by specific vehicle behavior. It may be possible to de

     Tire Pressure Monitor Transmitter ID 1 Missing Message (C214187-C214487)

    DESCRIPTION The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressure of each wheel. The measured values are transmitted to th

     Tire Pressure Monitor Transmitter ID 1 Component Internal Failure (C214196-C214496)

    DESCRIPTION The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressure of each wheel. The measured values are transmitted to th

    SEE MORE:

     Power Source Mode does not Change to ON (ACC)

    DESCRIPTION If the power switch is pressed with the electrical key transmitter sub-assembly in the cabin, the certification ECU (smart key ECU assembly) receives a signal and changes the power source mode. Related Data List and Active Test Items Problem Symptom Data List and Active Test

     Brake Switch "B" Circuit Short to Battery (P070312)

    DESCRIPTION The purpose of this circuit is to prevent the engine from stalling when the brakes are suddenly applied while driving with lock-up on. When the brake pedal is depressed, the stop light switch assembly sends a signal to the TCM. Then the TCM cancels the operation of the lock-up clut

    © 2020-2025 Copyright www.tcorollacross.com PT NL