Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

FR Door Lock Position Switch Status

Front door RH unlock detection switch signal

Lock or Unlock

Lock: Front door RH locked

Unlock: Front door RH unlocked

-

FL Door Lock Position Switch Status

Front door LH unlock detection switch signal

Lock or Unlock

Lock: Front door LH locked

Unlock: Front door LH unlocked

-

RR Door Lock Position Switch Status

Rear door RH unlock detection switch signal

Lock or Unlock

Lock: Rear door RH locked

Unlock: Rear door RH unlocked

-

RL Door Lock Position Switch Status

Rear door LH unlock detection switch signal

Lock or Unlock

Lock: Rear door LH locked

Unlock: Rear door LH unlocked

-

Back Door Lock Position Status

Back door lock signal

Lock or Unlock

Lock: Back door locked

Unlock: Back door unlocked

-

FR Door Courtesy Switch Status

Front door courtesy light switch assembly RH signal

Close or Open

Close: Front door RH closed

Open: Front door RH open

-

FL Door Courtesy Switch Status

Front door courtesy light switch assembly LH signal

Close or Open

Close: Front door LH closed

Open: Front door LH open

-

RR Door Courtesy Switch Status

Rear door courtesy light switch assembly RH signal

Close or Open

Close: Rear door RH closed

Open: Rear door RH open

-

RL Door Courtesy Switch Status

Rear door courtesy light switch assembly LH signal

Close or Open

Close: Rear door LH closed

Open: Rear door LH open

-

Back Door Courtesy Switch Status

Back door courtesy light switch signal

Close or Open

Close: Back door closed

Open: Back door open

-

IGR Power

IGR signal

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ON

-

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Door Lock

Door lock motor

OFF or ON

-

Door Unlock

Door lock motor

OFF or ON

-

D-Door Unlock

Door lock motor

OFF or ON

-

Trunk Lid / Back Door Open

Back door lock motor

OFF or ON

-

Wireless Buzzer

Wireless door lock buzzer

OFF or ON

-

    READ NEXT:

     Wireless Door Lock Tuner Component Internal Failure (B124296)

    DESCRIPTION The door control receiver is used to receive radio waves related to the entry functions of the electrical key transmitter sub-assembly. The certification ECU (smart key ECU assembly) decod

     No Answer-Back

    DESCRIPTION In some cases, wireless door lock control functions are normal but the hazard warning light and wireless door lock buzzer answer-back function do not operate. In such cases, hazard warning

     Wireless Door Lock Control System (w/o Smart Key System)

    SEE MORE:

     Stop and Start Priority Control System

    DESCRIPTION In stop and start control status, there is normal status (Standard) and stop and start priority status (Extended). Stop and start control status can be switched to the desired mode by operating the steering pad switch assembly, and the mode change is also shown on the multi-information

     Right Side Airbag Deployment Control Circuit Open (B002813)

    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode B002813 Right Side Airbag Deployment Control Circuit Open One of the following conditions is met: The airbag ECU assembly detects an open in

    © 2020-2025 Copyright www.tcorollacross.com PT NL